🪞 Custom Mirrors

Custom Mirrors in San Diego.

Custom mirrors measured, cut, and installed in San Diego — bathroom vanities, gym walls, and full-wall mirrors.

Custom Mirrors in San Diego, CA — Custom mirrors measured and installed.

Licensed & insured glass experts serving San Diego County

Get Your Free Estimate

Tell us a little about your window project. We'll be in touch shortly.

Attach a photo of the issue (optional)

Up to 5 photos. Helps us bring the right parts.

Free estimate · No obligation

Or call (619) 927-0759

A custom mirror is measured, cut, and installed to fit the actual wall — not bought in a fixed size and shimmed into place. San Diego Window Repairs measures, cuts, and installs bathroom vanity mirrors, gym and fitness mirrors, and full-wall mirrors across San Diego County. Free estimates, and the mirror is set level and secure before we leave.

Bathroom vanity mirrors

Vanity mirrors are the most common custom mirror we install. The measurement has to account for the faucet height, the light fixture above, and any tile border you want the mirror to sit inside. We measure the finished wall opening, cut the mirror to fit with consistent reveal, and set it with the correct adhesive and clips for the wall type — drywall, tile, or tile over cement board all take different fasteners. Edge finish matters in a bathroom: polished edges where the mirror meets open wall, and a sealed edge where it meets tile and water.

Gym and fitness mirrors

Gym mirrors are large, heavy, and usually installed as a wall of panels rather than a single sheet, because a single sheet that size will not survive transport or the wall plane. We measure the wall for level, plan the panel layout so the seams fall on a consistent line, and set each panel so the joints are tight and even. Mirror in a gym takes impact from equipment and needs correct adhesive coverage plus mechanical clips — adhesive alone on a large panel is not enough. Safety backing is used on gym and full-wall installations so that if the glass ever breaks it stays held together rather than falling.

Full-wall and living space mirrors

Full-wall mirrors are common in living rooms, hallways, and home gyms, and they are a layout problem before they are a glass problem. We check that the wall is flat and sound, plan where seams fall so they land on a stud or a consistent line, and confirm the mirror clears outlets, switches, and trim. Where the wall is out of flat by more than a small amount, we say so rather than forcing a large mirror onto it and leaving visible distortion.

Framed versus frameless mirrors

Frameless mirrors show a polished or beveled edge and are the cleaner look in a modern bathroom, but the edge is unforgiving — it has to be cut accurately and the reveal has to be even on all sides. Framed mirrors hide the edge and the fasteners, which makes them more forgiving on an older wall that is slightly out of square, and the frame can be matched to existing fixtures. Both install the same way underneath; the difference is what you see at the edge.

Mirror replacement after damage

A broken, desilvered, or de-laminating mirror is replaced to the original measurement so the surrounding tile, frame, or wall is not disturbed. Desilvering shows as dark or cloudy patches creeping in from an edge, usually where moisture has reached the backing — it cannot be polished out and the mirror has to be replaced. We remove the old mirror carefully, because a mirror held with adhesive comes off in pieces and the wall behind it often needs patching before the new one goes up.

Custom mirrors across San Diego County

We install custom mirrors through Downtown, La Jolla, Pacific Beach, Ocean Beach, Point Loma, Clairemont, Mira Mesa, North Park, Hillcrest, Mission Valley, Coronado, La Mesa, Chula Vista, El Cajon, Escondido, National City, Santee, Poway, Rancho Bernardo, and Encinitas. Coastal bathrooms in Pacific Beach, Ocean Beach, and Coronado desilver faster because salt air and humidity attack the mirror backing, which is why edge sealing matters more there. Estimates are free and in writing before any work starts.

Related services

Frequently asked questions

How is a custom mirror measured?

We measure the finished wall opening, not the old mirror. That means accounting for faucet height, the light fixture above, any tile border, and how much reveal you want on each side. Measuring the old mirror is how installations end up slightly off.

Can you install a mirror on tile?

Yes. Tile, and tile over cement board, need different fasteners and a different adhesive than drywall. We also seal the edge where the mirror meets tile, because that joint is where moisture gets behind the glass and starts desilvering.

Do you install gym mirrors as one piece or panels?

Usually panels. A single sheet large enough for a gym wall will not survive transport and will not sit flat on a normal wall. Panels with tight, even seams look continuous and install correctly. Gym and full-wall mirrors also get safety backing so broken glass stays held together.

What is desilvering and can it be fixed?

Desilvering is the dark or cloudy patch that creeps in from a mirror edge where moisture has reached the backing. It cannot be polished out or repaired — the mirror has to be replaced. Sealing the edges at installation is what prevents it.

Framed or frameless — which should I choose?

Frameless gives a cleaner modern look but the polished edge must be cut accurately and the reveal must be even, so it is unforgiving on an out-of-square wall. A frame hides the edge and fasteners and is more forgiving on older walls, and it can be matched to your existing fixtures.

Can you replace a broken mirror without damaging the tile?

In most cases, yes. We remove the old mirror carefully and replace it to the original measurement so the surrounding tile or frame is not disturbed. Where the mirror was set with adhesive the wall behind often needs minor patching before the new mirror goes up.

Do you cut mirror to size, or order it in?

Mirror is cut to your measurement. That is what makes it custom rather than a stock size shimmed into the opening. We measure, confirm the layout and edge finish with you, then cut and install.

Need custom mirrors today?

📞 (619) 927-0759

Last updated:

Free Estimate Call Now
Call Now Free Estimate