How to Identify Your Storefront System in San Diego
Identify your commercial entrance from the stile width, glazing method, and thermal break — CRL, Arcadia, Atlas, Kawneer and YKK AP, with San Diego notes.
Real San Diego prices, updated 2026
Door not closing or glass broken? We repair CRL, Kawneer & YKK storefronts. Call (619) 927-0759, 24/7.
Every storefront entrance is built from one of a handful of aluminum systems, and which one you have decides what hardware fits, which parts are still made, and whether a repair is even possible without replacing the entrance. The problem is nobody labels these. There is no badge on a storefront door telling you it is a Kawneer Tuffline 350 or an Arcadia AFG451T. This guide walks through how to identify your system from the outside, without taking anything apart, and what each identification means for repair.
Get this fixed: Storefront Door Repair in San Diego
Storefront and commercial entrance door repair across San Diego — closers, pivots, patch fittings, and panic hardware, diagnosed and fixed by commercial glass specialists.
Storefront Door Repair →Start here: what actually distinguishes one storefront system from another
You are not looking for a brand name. You are looking at five physical things: the width of the vertical stile between the glass and the edge of the door; whether glass is held by an exterior stop (captured) or bonded with structural silicone (offset-glazed); whether the aluminium has a thermal break — a visible separation, often a dark strip, inside the profile; the shape of the hardware where the closer or pivots attach; and whether the entrance is a full stile and rail door or an all-glass leaf held by patch fittings. Those five answers narrow almost every entrance to a family.
CRL all-glass entrances
The easiest to identify and the hardest to mistake. There is no metal stile along the vertical edge of the glass at all. The leaf is held by four patch fittings — two at the top corners, two at the bottom — plus possibly a rail across the top or bottom. CRL is the dominant hardware family for these, which is why people call them CRL doors even when the aluminium framing came from someone else. The top patch fitting carries an adjustable pivot insert; the bottom carries the weight through a separate insert. If your door is all glass with metal clamps at the corners, you have a patch-fitting entrance and the hardware is almost certainly CRL or a CRL-compatible pattern.
Arcadia systems: AFG451T and TC470
Arcadia systems are thermally broken, meaning the aluminium profile is split internally with a barrier so heat does not conduct straight through the frame. On an AFG451T you will see a 2 inch by 4-1/2 inch profile taking 1 inch glass, offset-glazed — the glass sits toward the interior side and is held by an exterior stop. The TC470 is also thermally broken and offset-glazed, but it uses four-sided structural silicone instead of a mechanical exterior stop, so there is no visible removable stop on the outside. That is the giveaway: if you cannot find an exterior glazing stop anywhere on the system, it is likely structurally silicone glazed.
Atlas aluminum: the H500 family
Atlas H500 is an impact-rated storefront system, common on coastal commercial buildings where wind-borne debris protection matters. Impact systems use heavier framing and laminated or impact-rated glass, so the frame looks more substantial than a standard storefront and the glass will be thicker in the opening. If your frame is noticeably heavier than a neighbouring building's and the glass reads as laminated rather than a thin single lite, impact-rated Atlas or an equivalent is a reasonable starting assumption. Confirm the exact series from the glass pocket and the hardware pattern.
Kawneer entrances: Tuffline 350 and 500
Kawneer Tuffline is one of the most widely installed commercial entrance families in the United States, so the odds are high. The 350 series is the narrower of the two; the 500 series carries a heavier profile. The critical thing to know is that pre-1989 and post-1989 Kawneer hardware are not interchangeable — the backset and the lock package changed. If your building predates 1989 and someone has already fitted modern hardware, you may be looking at a door that never quite latched correctly. Identifying the vintage matters more than identifying the series when you are ordering parts.
YKK AP entrances: 20D, 35D and 50D
YKK AP designates its entrance families by stile width: 20D is narrow-stile, 35D is medium-stile, and 50D is wide-stile. That naming convention makes YKK one of the easier families to identify once you have measured the stile face — the measurement maps almost directly to the model designation. YKK entrances also use a cam cylinder arrangement for some locking configurations, which matters when the lock is being replaced rather than repaired.
What to do with your answer
Once you know the family and rough vintage, the repair path usually becomes obvious. Patch-fitting entrances repair at the fittings, not the frame. Thermally broken systems with failed gaskets repair at the seals. Corroded frames that have lost their thermal break need full replacement rather than another round of parts. If you are still uncertain after measuring, photograph the stile, the hardware at the closer, and the glass edge, and send them over — that combination identifies almost any entrance in a few minutes.
🏡 What this means for San Diego homes
San Diego commercial frontages carry a particular mix. Downtown and Gaslamp buildings often retain Kawneer Tuffline entrances installed decades ago, which is why pre-1989 versus post-1989 hardware questions come up so often on those blocks. Coastal hotels and retail from La Jolla through Oceanside more often use thermally broken Arcadia or impact-rated Atlas systems, because salt-air corrosion and wind-driven rain punish non-thermal profiles across the county and impact-rated glazing is specified more on exposed coastal frontages.
Door not closing or glass broken? We repair CRL, Kawneer & YKK storefronts. Call (619) 927-0759, 24/7.
Common questions, answered
How do I know which storefront system I have?
Measure the vertical stile face width, then check whether the glass is held by a removable exterior stop or bonded with structural silicone, and whether the aluminium has an internal thermal break. Those three answers narrow almost every entrance to a family. All-glass with corner patch fittings is CRL; thermally broken with no exterior stop is likely Arcadia TC470.
Is a CRL door a door or a hardware brand?
Hardware. CRL makes the patch fittings, inserts, closers, and pulls that hold an all-glass entrance together. The aluminium framing around it may come from a different manufacturer. People say CRL door the way they say Kleenex, and for practical repair purposes the hardware family is what matters.
How do I tell a Kawneer 350 from a 500?
The 500 series uses a heavier profile than the 350. Measure the stile face and check the hardware pattern, and check the building or door vintage — pre-1989 and post-1989 Kawneer lock packages are not interchangeable, which matters more than the series when ordering parts.
What does 20D, 35D and 50D mean on a YKK entrance?
Stile width. 20D is narrow-stile, 35D is medium-stile, and 50D is wide-stile. YKK names its entrance families after the measurement, which makes them easier to identify than most.
Can I replace hardware without knowing the system?
Sometimes, but it is how doors end up with a closer that does not quite fit or a latch that never lines up. The stile measurement and the hardware pattern take two minutes and prevent most mismatched-parts returns.
Does the system affect whether I repair or replace?
Yes. Patch-fitting entrances repair at the fittings. Thermally broken systems repair at gaskets and seals. Frames that have lost their thermal break or corroded through need full replacement, because another set of parts will not hold.
Related window services in San Diego
Service areas we cover
Get a free written estimate
Call (619) 927-0759 or request a quote online — no pressure, exact pricing before any work starts.
Request Free Estimate